Features
| FEATURES | BENEFITS |
| LED Signal lights | LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts. |
| Counter blade rotation on left hand deck | Spreads grass clippings more evenly. Wing decks throw grass away from the rear deck. Rear deck doesn't get covered up nor does it get bogged down by cut grass. |
| 7'-8" transport width at lowest cutting height | Meets most city/county codes for transport width. |
| 6" Deck overlap | Eliminates skipping when going into a tight turn. |
| 11'-1" Cutting width - three 48" decks | Sized right for golf courses, cities, schools. Small decks give excellent flexibility. |
| Sleek frame design, including single beam hitch and compact deck overlap | Design allows operator to make tighter turns without leaving windrows and skips. AFM virtually becomes a zero turn mower. (Oversized tires may not allow this.) |
| Automatic transport wing locks | When wings are raised in the full transport position, the wings lock in place. No need to get off the tractor to lock. Pull rope from tractor seat to un-lock. |
| 18" Transport tires with tapered roller bearings | Transport tires offer smooth roading and less grass compaction. Allows grass to stand up. Tapered roller bearings offer longevity. |
| Removable transportation tire spindles | Allows a spindle to be replaced by simply removing two bolts. |
| Back wheels on side decks even with transportation tires | Allows tighter turns without skips. |
| Rigid rear side deck tires | Rigid wheel yokes holds hills and slopes better. Safer unit than the competition. |
| 13" Deck tires with sealant | 13" Tires offer great flotation, less lbs. per square inch. Sealant minimizes flats. |
| 1/4" Gauge wheel arms | Gives the mower gauge wheel arms a great deal of "hidden" strength. |
| Low pivot points on deck | The lower the pivot points are to the ground, the more side to side swing, allowing for excellent flotation from each deck. |
| Deflectors built into mower decks | Safety features meet ANSI standards. Many competitors use chains for protection. Once chains are removed the unit does not meet ANSI specifications. |
| Rear discharge | Even dispersal, discharged items are aimed downward. No rear chains are needed, which tend to clump damp grass. |
| Rounded front deck edges with no protruding skid shoe | Helps protect trees and other obstacles. |
| 5/16" Front edge & all-welded seams | Provides extra durability. |
| Cat. 3 Constant velocity main driveline | Constant velocity main driveline allows for tighter turns without harming U-joints in driveline, includes slip clutch. |
| Slip-clutch protection | Guards against premature gearbox failure. Protects mower deck spindles. |
| Cat. 2 wing drivelines | Reduces start-up torque that is put on the driveline, gearbox and gearbox support. |
| ABS guards | No paint to scratch off, lighter weight, no rattling or rust. |
| Heavy gearbox mounts on center and side mower decks | Handles start-up torque better. |
| Gearbox HP Rating | 30 -65 HP |
| Gearbox warranty | 5 years on parts and labor. Demonstrates our confidence in the gearbox’s quality and lasting performance. |
| Easy to grease blade spindles | No guards to remove for routine greasing of blade spindles. |
| Middle spindle sits towards the back of the mower deck | Uses less horsepower and allows material to escape the mower deck easier. The discharge of material is more even. Design eliminates windrowing. |
| Spring loaded idlers | Applies constant tension to belt to run efficiently. |
| Easy belt tension release | Easily release belt tension for changing belt or for winter storage. |
| High blade tip speed | (16,260 fpm) Lifts grass up for a clean cut and efficient discharge of material. Tip speed rates are as high or higher than the competition. |
| Choice of Blade | |
| Low Lift Blades | Highly recommended in sandy soils where lifting isn't crucial. Disturbs the soil very little, allowing blades to wear longer. |
| Medium Lift Blades | Medium suction for lifting grass. Requires less HP than high lift. |
| High Lift Blades | Greatest suction for lifting grass before cutting. Can take higher HP in tall dense grass. Not recommended in sandy soils. |
| Mulching Blade | Perfect for leaf mulching. |
| Optional Hydraulic Operated Transport Locks |
Transports locks can be released easily from the tractor seat while operating the same tractor control lever that raises and lowers the mower decks. Eliminates pulling a rope to release transport locks. |
Specs
| Discharge Type | Rear |
| Cutting Width | 11' - 1" |
| Overall Width | 11'- 3 1/2" |
| Transport Height | 5' - 11 1/2" |
| Transport Width | 7'-8" At Mid Cutting Height |
| Overall Length | 13'- 3" Transport Position |
| Weight | 2,040 lbs. |
| Tractor Horsepower | Minimum 30 HP and Maximum 65 HP |
| Hitch | Pull Type With Adjustable Clevis and Safety Tow Chain |
| Tongue Support | 2,200 lb. Capacity Screw Jack |
| Gearbox Support | 3/8" Steel Channel |
| Gearboxes | 540 RPM (1)-Splitter Gearbox and (3)-Wing Gearboxes |
| Gearbox Lubrication | Gear Lube 80-90W EP |
| Gearbox Oil Capacity | 3 - Wings: 3.5 pints SD Splitter: 2.125 pints or OMNI Splitter: 2.5 pints |
| Main Drive-line | (1) Category lll Constant Velocity With Slip Clutch |
| Deck Drive-lines (3) | Category II |
| Cutting Height | 1" to 5 1/2" in 1/4" increments |
| Deck Size and Quantity | 3 each at 48" |
| Deck Overlap | 6" |
| Deck Thickness | 3/16" |
| Anti-Scalp Roller | Front Center and Rear Outside Deck Corners |
| Blade Drive Belt | (1) - B-Section |
| Drive Belt Tensioning | Spring Loaded Idler |
| Blade Bearings | Sealed Ball Bearings |
| Blades Size and Type | 1/4" x 2 1/2" x 16 7/8" Medium Lift Standard |
| 3 Each Per Deck | Optional Blades - Low Lift, High Lift & Mulching |
| Blade Overlap | 1 3/16" |
| Blade Spindle Speed | 3,628 RPM |
| Blade Tip Speed | 16,020 FPM |
| Deck Tires | 10 Each, Air 13" x 5", Sealant With Tapered Roller Bearings |
| Deck Wheel Spindles | 1 1/4" With Nylon Bushings |
| Transport Tires | 2 Each, 18" x 9.5", Sealant With Tapered Roller Bearings |
| Transport Locks | Automatic Transport Locks With Pull Rope Release |
| Wing Flex | 23 Degrees Left To Right 22 Degrees Front To Back |
| Center Deck Flex | 13 Degrees Front To Back |
| Hydraulic Outlets | 1 Set Required |
| Deck Cylinders | Dual Acting |
| Gauge Wheel Arms | 1/4" Wall Square Tubing |
| Turning Radius | Zero Turning Radius |
| Mowing Capacity | @ 2 MPH = 2.68 Acres Per Hour @ 4 MPH = 5.37 Acres Per Hour @ 6 MPH = 8.10 Acres Per Hour |
| Signal lights | LED |
| 7 Pin connector | SAE J560 pin configuration |
SELECT THE CLOSEST LOCATION
-
Tanner, AL
After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299 -
Hopkinsville, KY
After Hours Emergency Parts:
270-887-4685
After Hours Emergency Service:
270-887-4685
After Hours Emergency:
270-887-4685 -
Mayfield, KY
After Hours Emergency Parts:
270-705-8806
After Hours Emergency Service:
270-705-4546
After Hours Emergency:
270-705-4546 -
Morganfield, KY
After Hours Emergency Parts:
270-952-4559
After Hours Emergency Service:
270-952-6411 -
Owensboro, KY
After Hours Emergency Parts:
270-577-2522
After Hours Emergency Service:
270-577-2522 -
Russellville, KY
After Hours Emergency Parts:
270-725-2437
After Hours Emergency Service:
270-847-3111 - Benton, IL
-
McLeansboro, IL
After Hours Emergency Parts:
618-308-7124
After Hours Emergency Service:
618-308-7643 -
Vergennes, IL
After Hours Emergency Parts:
618-534-3755
After Hours Emergency Service:
618-521-9902 -
Poseyville, IN
After Hours Emergency Parts:
812-305-4464
After Hours Emergency Service:
812-270-3148 -
Princeton, IN
After Hours Emergency Parts:
812-305-0262
After Hours Emergency Service:
812-385-6688 -
Washington, IN
After Hours Emergency Parts:
812-486-9028
After Hours Emergency Service:
812-486-8703 -
Columbus, MS
After Hours Emergency Parts:
662-889-1565
After Hours Emergency Service:
205-399-5530
After Hours Emergency:
205-367-7365 -
Brownsville, TN
After Hours Emergency Parts:
731-697-8990
After Hours Emergency Service:
731-432-9536
After Hours Emergency:
731-882-2844 -
Fayetteville, TN
After Hours Emergency Parts:
931-212-3209
After Hours Emergency Service:
931-619-7357
After Hours Emergency:
931-675-3973 -
Ethridge, TN
After Hours Emergency Parts:
931-201-1458
After Hours Emergency Service:
931-244-5394 -
McMinnville, TN
After Hours Emergency:
931-619-7594 -
Newbern, TN
After Hours Emergency Parts:
731-345-6394
After Hours Emergency Service:
731-345-6404
After Hours Emergency:
731-345-6350 -
Trenton, TN
After Hours Emergency Parts:
731-478-4286
After Hours Emergency Service:
731-345-6576
After Hours Emergency:
731-345-6546 -
Union City, TN
After Hours Emergency Parts:
731-514-0081
After Hours Emergency Service:
731-446-2216
After Hours Emergency:
270-356-6266