Features
| Features | Benefits |
| Surpassed rugged industry standards |
All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| 90 Hp gearbox | A rugged heavy built gearbox capable of handling heavy cutting applications. |
| Cat. 4 drive-line with 2-plate slip-clutch |
Slip-clutch drive-line offers convenience for continual work. |
| Cat I or Cat II Hitch Quick-Hitch Capability |
Permits deck to follow the terrain for an even cut. Quick-Hitch provides for fast hook-up. |
| Lower clevis type 3-point hitch |
Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| 84" Cutting width | Wide cutting width, Reduces cutting time in the field. |
| Heavy 10 gauge deck construction |
Can withstand more abuse than lighter gauge decks. |
| Box tubing deck supports | Makes for a stronger rigid deck. |
| Fully welded deck | Adds additional strength. |
| Extended cutter front | For increased material flow and added protection. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutter. |
| 9 1/2" Deck Height | Allows cutter to handle heavy cutting conditions. |
| 2" to 11" Cutting height | Provides for a wide range of cutting conditions. |
| 1/4" x 2 1/2" Full length skid shoes |
Provides sidewall reinforcement and full protection to bottom of sidewall. |
| 1/2" x 4" Heat-treated free swinging blades |
Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 10 Gauge stump jumper | Standard oval stump jumper slides over stumps, rocks, and debris. |
| High blade tip speed | Ensures clean cut. (17,113 FPM) |
| 2" Cutting capacity | Can aid in cleaning brush |
| Available with single or dual tailwheels |
Dual tailwheels offer greater stability in uneven terrain. |
| 15" Laminated tailwheel | Laminated material is long lasting in rough conditions. |
| Heavy-duty spindle on tailwheel |
Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel assembly. |
| Guarding | Protect against flying debris. Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard. |
| Drive-line Holder | Keeps drive-line up out of dirt. Easier hook up of drive-line. |
Specs
| Machine Weight with Front Rubber Guard and Rear Metal Band) |
851 lbs. without driveline |
| Hitch | Category l or Category II, Quick-Hitch Ready |
| Cutting Width | 84" |
| Overall Width | 89" |
| Overall Length with Tail Wheel | 135 1/8" |
| Deck Height (Bottom of Deck to Bottom of Skid Shoe) |
9 1/8" |
| Cutting Height | 2" - 11" |
| Cutting Capacity | 2" Diameter |
| Recommended Tractor Horsepower | 45 - 90 horsepower |
| Power Take-Off Speed | 540 rpm |
| Gearbox Horsepower Rating | 90 horsepower |
| Gearbox | 1:1.44 Speed-Up Beveled Gears with Cast Iron Housing |
| Gearbox Lubrication Capacity & Type | 7 Pints of 80-90W EP Gear Lube |
| Gearbox Input/ Output Shaft Size | Input Shaft = 1 3/8" - 6 Spline Output Shaft = 2" Dia. |
| Deck Construction | All welded deck |
| Deck Material Thickness | 10 Ga. |
| Skid Construction | Standard 1/4" x 2 1/2" welded on |
| Stump Jumper | Oval 10 ga. Pan |
| Blades (2) | 1/2" x 4" Heat Treated Alloy Steel Free-Swinging High Lift - Low Friction |
| Blade Bolt | Keyed with harden flat washer and locknut |
| Blade Tip Speed | 17,113 fpm |
| Driveline | ASAE Category 4 |
| Driveline Protection | Slip Clutch |
| Tailwheel Mount Assembly | Welded arm and Caster Fork |
| Tailwheel | 4" x 8" x 15" Laminated Tire |
| Front Guard | Optional: Rubber Guard or Chain Guard |
| Rear Guard | Standard: Metal Band Optional: Chain Guard |
SELECT THE CLOSEST LOCATION
-
Tanner, AL
After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299 -
Hopkinsville, KY
After Hours Emergency Parts:
270-887-4685
After Hours Emergency Service:
270-887-4685
After Hours Emergency:
270-887-4685 -
Mayfield, KY
After Hours Emergency Parts:
270-705-8806
After Hours Emergency Service:
270-705-4546
After Hours Emergency:
270-705-4546 -
Morganfield, KY
After Hours Emergency Parts:
270-952-4559
After Hours Emergency Service:
270-952-6411 -
Owensboro, KY
After Hours Emergency Parts:
270-577-2522
After Hours Emergency Service:
270-577-2522 -
Russellville, KY
After Hours Emergency Parts:
270-725-2437
After Hours Emergency Service:
270-847-3111 - Benton, IL
-
McLeansboro, IL
After Hours Emergency Parts:
618-308-7124
After Hours Emergency Service:
618-308-7643 -
Vergennes, IL
After Hours Emergency Parts:
618-534-3755
After Hours Emergency Service:
618-521-9902 -
Poseyville, IN
After Hours Emergency Parts:
812-305-4464
After Hours Emergency Service:
812-270-3148 -
Princeton, IN
After Hours Emergency Parts:
812-305-0262
After Hours Emergency Service:
812-385-6688 -
Washington, IN
After Hours Emergency Parts:
812-486-9028
After Hours Emergency Service:
812-486-8703 -
Columbus, MS
After Hours Emergency Parts:
662-889-1565
After Hours Emergency Service:
205-399-5530
After Hours Emergency:
205-367-7365 -
Brownsville, TN
After Hours Emergency Parts:
731-697-8990
After Hours Emergency Service:
731-432-9536
After Hours Emergency:
731-882-2844 -
Fayetteville, TN
After Hours Emergency Parts:
931-212-3209
After Hours Emergency Service:
931-619-7357
After Hours Emergency:
931-675-3973 -
Ethridge, TN
After Hours Emergency Parts:
931-201-1458
After Hours Emergency Service:
931-244-5394 -
McMinnville, TN
After Hours Emergency:
931-619-7594 -
Newbern, TN
After Hours Emergency Parts:
731-345-6394
After Hours Emergency Service:
731-345-6404
After Hours Emergency:
731-345-6350 -
Trenton, TN
After Hours Emergency Parts:
731-478-4286
After Hours Emergency Service:
731-345-6576
After Hours Emergency:
731-345-6546 -
Union City, TN
After Hours Emergency Parts:
731-514-0081
After Hours Emergency Service:
731-446-2216
After Hours Emergency:
270-356-6266