Features
| Features | Benefits |
| Counter blade rotation on center and right-hand deck |
Spreads grass clippings more evenly. Wing decks throw grass away from the rear deck. Rear deck doesn't get covered up or bogged down by cut grass. Prevents robbing tractor horsepower. |
| 5'-7" (1.7 m) Transport width | Meets most city/county codes for transport width. |
| 6" (15 cm) Deck overlap | Eliminates skipping when going into a tight turn. |
| 10'-11" (3.5 m) Cutting width three 48" decks |
Sized right for golf courses, cities, schools. Small decks give excellent flexibility. |
| Sleek frame design, including single beam hitch and compact deck overlap |
Design allows operator to make tighter turns without leaving windrows and skips. AFM virtually becomes a zero turn mower. (Over-sized tires may not allow this.) |
| Automatic transport wing locks | When wings are raised in the full transport position, the wings lock in place. No need to get off the tractor to lock. Pull rope from tractor seat to un-lock. |
| Optional Hydraulic Transport Locks | Transport locks can be released easily from the tractor seat while operating the; same tractor control lever that folds and unfolds the mower decks. Eliminates pulling a rope to release transport locks. |
| 18" Transport tires with tapered roller bearings |
Transport tires offer smooth roading and less grass compaction. Allows grass to stand up. Tapered roller bearings offer longevity. |
| Removable transportation tire spindles | Allows a spindle to be replaced by simply removing one bolt. |
| Back wheels on side decks in line with transportation tires | Allows tighter turns without skips. |
| Zero turn radius | Sleek frame design allows operator to make tighter turns without leaving windrows or skips. The AFM virtually becomes a Zero Turn Mower. |
| Rigid rear side deck tires. | Rigid wheel yokes holds hills and slopes better. |
| 10" Solid rubber deck tires | Solid rubber won't go flat. |
| Square tube gauge wheel arms | Gives the mower gauge wheel arms a great deal of "hidden" strength. |
| Low pivot points on deck | The lower the pivot points are to the ground, the more side to side swing, allowing for excellent flotation from each deck. |
| Deflectors built into mower decks | Safety features meet ANSI standards. Many competitors use chains for protection. Once chains are removed the unit does not meet ANSI specifications. |
| Rear discharge | Even dispersal, discharged items are aimed downward. No rear chains are needed, which tend to clump damp grass. |
| Rounded front deck edges with no protruding skid shoe | Helps protect trees and other obstacles. |
| 1/4" (6 mm) Front edge & all-welded seams | Provides extra durability. |
| Cat. 3 equal angle main driveline | Equal angle main driveline allows for tighter turns without harming U-joints in driveline. |
| Shear bolt protection | Guards against premature gearbox failure. Protects mower deck spindles. |
| Cat. 3 wing drivelines | Designed to withstand start-up torques. |
| ABS guards | No paint to scratch off, lighter weight, no rattling or rust. |
| Heavy gearbox mounts on center and side mower decks | Handles start-up torque better. |
| Gearbox Horsepower Rating | 30-55 hp (22-41 kw) |
| Sealed for life blade spindle bearings | No blade spindles to grease means no guards to remove to grease blade spindles. |
| Middle spindle sits towards the back of the mower deck. |
Uses less horsepower and allows material to escape the mower deck easier. The discharge of material is more even. Design eliminates windrowing. |
| Spring loaded idlers | Applies constant tension to belt to run efficiently. |
| High blade tip speed | Lifts grass up for a clean cut and efficient discharge of material. Tip speed rates are as high or higher than the competition. |
| Choice of Blade Medium lift standard Others available thru parts dept. |
Low Lift - Highly recommended in sandy soils where lifting isn’t crucial. Disturbs the soil very little, allowing blades to wear longer. Medium Lift - Medium suction for lifting grass. Requires less horsepower than high lift. High Lift - Greatest suction for lifting grass before cutting. Can take higher horsepower in tall dense grass. Not recommended in sandy soils. Mulching - Perfect for leaf mulching. |
Specs
| Discharge type | Rear |
| Cutting width in (m) | 132 (3.35) |
| Overall width in (m) | 135 (3.42) |
| Transport height in (m) | 76 (1.93) |
| Transport width in (m) | 67 (1.7) |
| Overall length in (m) | 136 (3.45) in transport position |
| Weight lbs. (kg) | 1,952 (885) |
| Hitch Weight lbs. (kg) | 374 (170) |
| Tractor horsepower hp (kW) | Minimum 30-55 (22-41) |
| Hitch | Pull type with safety tow chain |
| Tongue support lbs. (kg) | 2,000 (907) Capacity Screw Jack |
| Gearbox support in (mm) | 1/4 (6) Steel plate |
| Gearboxes | 540 rpm (1)-splitter gearbox and (3)-wing gearboxes |
| Gearbox lubrication | Gear lube 80-90W EP |
| Gearbox oil capacity pints (L) | Three - wings: 1.7 (.8) Splitter: 1.32 (.62) |
| Main driveline (1) | Category III equal angle |
| Deck drivelines (3) | Category III with shearbolt protection |
| Cutting height in (mm) | 1 to 5 1/2 in 1/2 (25 to 140 in 13 increments) |
| Deck size and quantity in (m) | Three each at 48 (1.22) |
| Deck overlap in (cm) | 6 (15) |
| Deck thickness ga. (mm) | 10 (3.4) |
| Blade drive belt | 1 per deck - B-section V belt |
| Drive belt tensioning | Spring loaded idler |
| Blade bearings | Sealed ball bearings |
| Blade size and type 3 each per deck in (mm) | Standard medium lift blades - 1/4 x 2 1/2 x 16 7/8 (6 x 64 x 430) Optional blades - Low lift, high lift, & mulching |
| Blade overlap in (mm) | 3/16 (5) |
| Blade tip speed fpm (mpm) | 16,000 (4900) |
| Deck tires | Ten each, 10" x 3.25", solid rubber with caged roller bearing |
| Deck wheel spindles in (cm) | 1" (25.4) with nylon bushings |
| Transport tires | Two each, 18" x 9.5", sealant with tapered roller bearings |
| Transport locks | Automatic transport locks with pull rope release |
| Wing flex | 23° left to right 22° front to back |
| Rear deck flex | 13° front to back |
| Hydraulic outlets | One set required |
| Deck lift cylinders | Dual acting |
| Gauge wheel arms | Square tubing with 1/4" (6 mm) wall |
| Turning radius | Zero turning radius |
| Mowing capacity | @ 2 mph = 2.68 acres per hour (3.2 km/h = 1.1 hectares per hour) @ 4 mph = 5.37 acres per hour (6.4 km/h = 2.2 hectares per hour) @ 6 mph = 8.10 acres per hour (9.7 km/h = 3.3 hectares per hour) |
| Signal lights 7 pin connector | Incandescent bulb SAE J560 pin configuration |
SELECT THE CLOSEST LOCATION
-
Tanner, AL
After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299 -
Hopkinsville, KY
After Hours Emergency Parts:
270-887-4685
After Hours Emergency Service:
270-887-4685
After Hours Emergency:
270-887-4685 -
Mayfield, KY
After Hours Emergency Parts:
270-705-8806
After Hours Emergency Service:
270-705-4546
After Hours Emergency:
270-705-4546 -
Morganfield, KY
After Hours Emergency Parts:
270-952-4559
After Hours Emergency Service:
270-952-6411 -
Owensboro, KY
After Hours Emergency Parts:
270-577-2522
After Hours Emergency Service:
270-577-2522 -
Russellville, KY
After Hours Emergency Parts:
270-725-2437
After Hours Emergency Service:
270-847-3111 - Benton, IL
-
McLeansboro, IL
After Hours Emergency Parts:
618-308-7124
After Hours Emergency Service:
618-308-7643 -
Vergennes, IL
After Hours Emergency Parts:
618-534-3755
After Hours Emergency Service:
618-521-9902 -
Poseyville, IN
After Hours Emergency Parts:
812-305-4464
After Hours Emergency Service:
812-270-3148 -
Princeton, IN
After Hours Emergency Parts:
812-305-0262
After Hours Emergency Service:
812-385-6688 -
Washington, IN
After Hours Emergency Parts:
812-486-9028
After Hours Emergency Service:
812-486-8703 -
Columbus, MS
After Hours Emergency Parts:
662-889-1565
After Hours Emergency Service:
205-399-5530
After Hours Emergency:
205-367-7365 -
Brownsville, TN
After Hours Emergency Parts:
731-697-8990
After Hours Emergency Service:
731-432-9536
After Hours Emergency:
731-882-2844 -
Fayetteville, TN
After Hours Emergency Parts:
931-212-3209
After Hours Emergency Service:
931-619-7357
After Hours Emergency:
931-675-3973 -
Ethridge, TN
After Hours Emergency Parts:
931-201-1458
After Hours Emergency Service:
931-244-5394 -
McMinnville, TN
After Hours Emergency:
931-619-7594 -
Newbern, TN
After Hours Emergency Parts:
731-345-6394
After Hours Emergency Service:
731-345-6404
After Hours Emergency:
731-345-6350 -
Trenton, TN
After Hours Emergency Parts:
731-478-4286
After Hours Emergency Service:
731-345-6576
After Hours Emergency:
731-345-6546 -
Union City, TN
After Hours Emergency Parts:
731-514-0081
After Hours Emergency Service:
731-446-2216
After Hours Emergency:
270-356-6266