Air Manifold Gauge

A pressure switch measures air manifold pressure using inches of water column. The switch is connected to the in-cab control with warning light and buzzer to warn of insufficient air pressure, ensuring proper application.

Manifold-Venturi System and Funnel Tray

The venturi and manifold systems can be lowered by means of a quick release. Funnel trays are inserted for collection of product when calibrating or emptying the unit.

Hopper Bottom Slide Gates

Manually operated slide gates stop product flow to the metering system, allowing you to remove the roller for cleaning or servicing.

Calibration Hand Crank

To make calibrating a product as precise and easy as possible, a hand-crank is provided to turn the metering system. The product can be collected by using the funnel trays and weighed for determining exact application rates.

In-Cab Control

The dual electric clutch control allows you to operate the metering system from the operator’s seat. Two magnetic clutches and in-cab control allow half shut-off on either side.

Hopper:

• 18 cubic feet
• 409 stainless steel with a two-component epoxy primer and a two-component, cross-linked acrylic top coat
• Weather tight lid
• Product level sight gauge

Metering:

• Ground driven
• Half shut off on either side
• Comes with two types of metering roller
• 28-groove rollers for fine granulars and small seeds
• 12-groove rollers for fertilizer and large seeds
• In-cab electric clutch control and air manifold monitor
• 60-speed gearbox with five percent between settings
• Air manifold and venturi system drop for easy cleaning
• Half width shut off on either side

Fan:

• 18-inch impeller with three-inch outlet
• Operates at 3200-4000 RPM
• Hydraulic or gas engine fan drive
• Hydraulic – 2.2 CID motor requires 8 GPM; hydraulic lines to hitch included (customer supplied connectors); includes sheaves, belt, shields, flow control with check valve
• Gas engine – 9 HP engine; comes with cyclone air cleaner; includes centrifugal clutch, engine mount, sheaves, belt and shields

Note: Engine ordered separately

Booms:

• Broadcast or Inter-row banding boom

Broadcast Boom:

• Self-leveling boom frame
• Six left-hand and six right-hand broadcast deflectors
• 24-foot boom (can be extended to 20 or 24 feet with optional extension kits)
• Adjustable boom height
• 1.25-inch ID, PVC Hose

Inter-row Banding Boom:

• Two stainless steel assemblies with six drop tubes
• Telescoping to accommodate various row spacing up to 10 feet
• Adjustable angle and height provide different band application widths
• Also includes a 7-foot, non-folding broadcast boom with breakaways for inter-row broadcasting with 12 drop tubes
• 1.25-inch ID, PVC hose

Chassis:

• 1,500-pound rubber torsion axle
• Five-bolt hubs
• P265/50R15 tires
• Tail lights
• Safety chains
• Clevis type hitc

Options:

• Foam marker
• 4- or 8-foot broadcast boom extension

Dimensions/Shipping Information:

• Height: 6 ft.
• Width: 6 ft. 10 in.
• Length: 8 ft. 7 in.
• Weight: 1,080 lb.